Do You Need a Septic Inspection to Sell a Home in San Juan County?
Yes. San Juan County wants proof of a satisfactory septic inspection before a home on septic is sold. A system missing risers, ports, pump alarms or effluent filters must add them at the sale.
The state adds its own step. From February 1, 2027, Washington’s on-site sewage rule asks sellers for a transfer inspection by a third-party inspector. Book the inspection when you list, so any fix fits before closing. Our real estate septic inspections serve homes across the islands.
What does San Juan County require before a home sale?
San Juan County Health and Community Services runs the septic program. Its rules sit in chapter 8.16 of the county code. Section 8.16.160 requires proof of satisfactory inspections, on the county schedule, before a home is sold. The same section lists maintenance parts an existing system must have at the time of sale:
- Access risers on the septic tank and the pump chamber
- A riser on the distribution box, or its spot clearly marked
- Observation ports in the drainfield, sand filter or mound
- Clean-outs on pressure distribution laterals
- Audible and visual alarms on pumps
- Effluent filters
The county’s 2007 program plan found that most systems put in before 1998 lacked these parts. If your tank sits under buried lids, septic tank risers and lids bring the access up to grade.
The county also wants a record drawing on file. That is the map of where each part of the system sits. If none exists, a licensed designer or a certified inspector can draw one. A home on a seepage pit must upgrade to current design standards at the sale.
The state rule, WAC 246-272A-0270, stacks on top of the county code. It already asks the seller to hand the buyer all available maintenance and repair records with the disclosure statement. From February 1, 2027, it adds the transfer inspection by a third-party inspector the county authorizes. The county may skip that step when routine inspections are current and were done by a third party.
Who orders the septic inspection, the seller or the buyer?
The county code and the state rule both put the duty on the system owner. In a sale, that owner is the seller. A seller who books the inspection at listing has the answers ready for the disclosure form.
Washington’s seller disclosure statement asks plain questions about the septic system:
- When was it last pumped?
- When was it last inspected, and by whom?
- How many bedrooms was it approved for?
- Have there been changes or repairs?
- Does the whole system, drainfield included, sit inside the property lines?
- Does it need monitoring more often than once a year?
The seller delivers that form within five business days of mutual acceptance, unless both sides agree otherwise. The buyer then has three business days to accept it or back out. A buyer can also hire a separate inspector. The form itself names on-site wastewater treatment inspectors among the experts a buyer may want.
What does the inspection report cover?
The inspector fills in the county’s On-Site Sewage System Inspection Form and sends it to the county. The form has a box for a for-sale inspection. It also asks whether the maintenance parts are in place.
| Part of the system | What the county form records |
|---|---|
| Septic tank | Scum and sludge depth, baffles, the effluent filter, risers, roots or surface water getting in |
| Pump chamber | Floats, alarms, the splice box and the pump |
| Drainfield | Observation ports present, ponding in them, sewage at the surface, the distribution box |
| Primary and reserve areas | No roads or buildings on them, and no livestock pens |
| Pressure laterals | Laterals flushed at the clean-outs, pressure head measured |
| Mound or sand filter | Seepage at the toe of a mound, effluent levels in a sand filter |
| System status | Failing or not, deficiencies found and corrected |
From February 2027, the state’s transfer report also lists the permitted system type and design flow. It confirms the record drawing is accurate, or it adds a site plan of every part.
The same county form covers routine septic inspections, the check owners owe every one or three years. Buyers can look up a home’s past inspections on the county website. Septic designs are in the county’s permit search.
What happens if the septic system fails the inspection?
State rules give examples of a failure:
- Sewage on the surface of the ground
- Sewage backing up into the house because the soil absorbs too slowly
- Sewage leaking from a tank
- Effluent polluting groundwater or surface water
The inspector must report a failure to the county right away. A repair then needs a design, usually from a licensed designer, and a county permit before work starts. State rules direct the county to allow the least costly repair that meets standards. For a failure found during a sale, the county may set a compliance schedule, a timeline for the repair.
Some findings are smaller. A broken baffle or a stuck pump float counts as a minor repair under state rules. Pumps, floats, alarms, lids and baffles are all part of our septic repair work. The purchase deal says who pays for a fix, so ask your agent about it early.
How do the ferry and the closing date fit together?
Our trucks ride the public ferry between the islands. A home off San Juan Island gets an inspection date that fits the sailing schedule. A few things can add days before the report is done:
- Buried lids that must be dug out before the tank can be opened
- Maintenance parts the county wants in place at the sale
- No record drawing on file, so one must be drawn
- A sludge reading that says the tank is due for pumping
- A failure, which needs a design and a county permit before the repair
Inspect when you list the home. The report is then ready for the disclosure form, with room left before closing for any fix.
What does a septic inspection for a home sale cost?
One national cost guide puts a septic inspection for a home sale at $300 to $650. Another puts it at $400 to $700. These are market numbers, not our price list.
| Line item | Published national range |
|---|---|
| Septic inspection for a home sale | $300 to $650 in one guide, $400 to $700 in another |
| Routine maintenance inspection | $150 to $450 |
| Uncovering a tank with no risers | $50 to $250 |
| Septic tank pumping | $290 to $560 in one guide, $295 to $610 in another |
| Drainfield replacement | $3,000 to $15,000 in one guide, $5,000 to $12,000 in another |
If a repair is needed, the county adds its own fees. Its posted fee list, dated 2025, shows $200 for a repair design application. The installation permit for a repair is $130 on the same list.
On the islands, a few things move the price. The system type and its number of parts matter. Buried lids add work, and so does a tank that needs pumping.
A home off San Juan Island also adds the ferry crossing. For any home, we look at the system and put the quote in writing.
Ready to sell a home on septic in San Juan County?
Starr Excavation and Septic inspects septic systems before a sale across San Juan County. Call or text (360) 378-5045 to book a home sale septic inspection. Tell us your closing date when you call.